Mold Injection Processing Frequently Asked Questions
Release time:
2025-02-12
Many customers reflect the plastic mold is ready to acceptance, why the mold injection molding process will appear unexpected quality abnormalities out. First of all, to confirm the mold injection molding processing quality problems, often and the quality of the mold has a very big direct relationship.
For example, mold mold (referred to as Fit mold) do not do a good job is not fine enough, then there may be the phenomenon of the product cloak; or the mold in the thimble is not fine enough, there may be often easy to break the needle of the problem, so that in the mold injection molding production, is a very disturbing and headache, if there is such a phenomenon not only affects the production of the product schedule, but also because of the quality of the mold may lead to the product will also appear a lot of quality problems, and the product will also appear. Quality problems lead to products will also appear a lot of quality problems.
Content from the network, if there is any problem, please contact this site to delete.
Focus on hot spots
Contact Phone:
Email:
online message
Leave your phone number and we will contact you as soon as possible.